Fix Error Code 43 for USB in Windows 10 & Recover Data

How do I fix Code 43 Error and make my storage device work again? On this page, we’ll provide a complete guide to help you effectively resolve the USB flash drive error code 43 issue without losing any data.

Fixes Code 43 Error on USB/External Hard Drive in Windows 10

3 Quick Tips to Fix Code 43 Error:

  1. Reconnect Device – Unplug & replug device, switch USB port.

2. Replace Connection Cable – If the cable is broken, change a new one and reconnect the device to PC.

3. Restart PC – Unplug the problematic device, reboot PC. When PC restarts, reconnect and check the device.

After this, open disk management and see if your drive is detectable. If yes, turn to reliable data recovery software as shown at the end of this page to recover all your precious data first.

If the error code 43 still exists on your USB or other devices, there are four effective ways for you to apply:

Workable SolutionsStep-by-step Troubleshooting
Fix 1. Update Device DriverUpdate the device driver > roll back the USB driver > reinstall the device driver…Full steps
Fix 2. Reinstall USB Hub DriverGo to the “Driver” tab and choose “Disable Device” > “Enable Device”…Full steps
Fix 3. Re-enable the DeviceGo to the “Driver” tab and choose “Disable Device” > “Enable Device”…Full steps

Error: Unknown Device – Windows Has Stopped This Device with Code 43

Don’t worry if your USB flash drive or external USB drive is not recognized due to Code 43 error

What is Error Code 43?

Code 43 error, it’s one of the Device Manager error codes which says “Windows has stopped this device because it has reported problems. (Code 43)”.

What happens if Code 43 exists on your device?

When you get error code 43 with your USB or other hardware devices, your devices will properly become:

  • Unreadable
  • OS notify drive failure
  • Unrecognizable by computer
  • Files inaccessible, etc.

So how to fix this error and make your drive work properly again? In the next part, we’ll guide you to address this issue effectively.

Method 1. Update Device Driver to Fix Unrecognized Code 43 Device

If your USB has a hardware problem or its driver or driver software is falling, you can try to install the latest drivers for your USB drive. It’s very likely that installing the latest drivers for the device will remove the code 43 error.

Option 1. Update USB/Device Driver

Step 1. Go to “Search”, type device manager, and choose “Device Manager” from the result. 

Step 2. Find and right-click the problematic device and choose “Properties”.

Step 3. Click “Driver” and then choose “Update Driver”.

Step 4. Click “Search automatically for updated driver software”.

Solution 2. Roll Back the USB Driver

If you have updated the device driver before the error code 43 occur, rolling back the device driver could be one of the choices to fix the issue.

Step 1. Open “Device Manager”.

Step 2. Right-click your device driver and choose “Properties”.

Step 3. Go to “Driver” > “Roll Back Driver”.

Method 2. Reinstall the Device Driver to Fix Code 43 Error

Some users have also reported that reinstalling the device driver to fix error code 43 in Windows 10. Try to uninstall and then reinstall your USB driver:

Step 1. Press Windows + S keys, search Device Manager, and click to open it. 

Step 2. Expand disk drive and right-click the malfunctioning device, and then click “Uninstall”.

When a warning message appears that you are uninstalling a device from your system, click “OK”. 

Step 3. Right-click your computer name in Device Manager and click “Scan for hardware changes”.

The Device Manager scans your system and automatically reinstalls your device.

Step 4. Right-click the device and click “Properties”.

Step 5. On the General tab of the device Properties dialog box, in Device status, you should see the message “This device is working properly”.

Method 3. Re-enable the Device to Remove Code 43 Error

If you have tried method 2, you may be quite familiar with Device Manager now. To re-enable your USB, you just need to go to:

Step 1.  Open Device Manager, expand Disk drives.

Step 2. Right-click the problematic device with Code 43 error, select “Disable Device”.

Step 3. Click “Yes” to confirm.

Step 4. Re-click the device and select “Enable Device”.

Step 5. Restart the computer to keep all changes.

After this, you can check if your device is functioning properly now. 

IMPORTANT: Recover Data from USB with Code 43 Error in Windows 10

For the case that code 43 USB error may cause Windows OS to fail to detect or recognize USB drive, making USB data inaccessible. It’s quite necessary to learn to recover data from a not-recognized external drive.

As long as your device can be detected by Disk Management, you can recover lost, inaccessible, unreadable data from external USB flash drives with Code 43 error.

Solution To Various Msn Email Issues Prescribed By Support Experts

MSN is one of the widely used email account with top most email management and account security features. Enhance the email security settings and also protect the account from spam emails by blocking emails. Microsoft Network user can create separate folder in the email account and one can sync the MSN contacts with other contacts. Msn emails can be accessed through various devices through proper email synchronization.

Now there are occasions when the Msn email user might face various email account issues. Some of the email troubles are discussed in this article with proper troubleshooting steps. Also one can contact Msn technical support to get solution for the advanced email account troubles. Msn Email Issues

How To Block Email Sender In Msn Account?

Here are the steps to block specific sender from sending emails in the MSN account-

  • Open MSN account and click on ‘Help & Settings’.
  • Now click on ‘Settings’ and in the left panel click on ‘Email’.
  • Next click on ‘Junk E-Mail Guard’ followed by ‘Blocked sender list’.
  • In the ‘E-mail addresses’ box enter the sender’s email address to be blocked.
  • Click on ‘Add’ and then ‘Save Changes’.

Dial Msn customer support phone number to contact the email expert to know more about how to block email addresses. Support team provides best steps to block email address in the email account.

How To Fix The Locked Msn Account?

MSN account can be blocked due to various reasons and one of the major reason can be due to any security issue. To know about the reasons for Msn account blockage contact the Msn customer support team. At times blocked account can be recovered through password reset also.

Here are the steps to reset Msn account password –

  • Open the Msn login page and click on  Can’t access your account?’.
  • Give the reason for password change and click ‘Next’.
  • Enter the Msn ID and also enter the characters correctly in the box. Click on ‘Next’ to move forward.
  • Select a process from alternate email address or phone number to recover the verification code. Click ‘Next’.
  • Once the code is recovered enter that code in the given text box to have access to the password reset page.
  • Enter new password for the Msn email account and save the changes.

If the user don’t have access any of the verification options then user can answer security or account related questions to prove the user authenticity. Also dial Msn tech support number in case of any problem in resetting the account password. Discuss the account block issue with the support experts and get the best solution for unblocking the Msn account.

How To Fix Msn Email Receiving Or Sending Issue?

MSN user not able to send or receive email is one of the common problems faced by the user. Try out these troubleshooting steps to fix the issue –

  • Try alternate browser to access the email account in case user is not able to access the Msn account. Also delete the history details from the browser and then access the Msn emails.
  • Disable the extensions or firewalls and then try accessing the Msn account.
  • Check the MSN email server settings and see if the settings are done correctly.
  • Finally if nothing is solving the problem then dial Msn technical support phone number to get the best troubleshooting steps.

How to fix the Runtime Error 235 MSN Explorer Error 235

This article features error number Code 235, commonly known as MSN Explorer Error 235 described as Cannot Install MSN Explorer.

About Runtime Error 235

Runtime Error 235 happens when MSN Explorer fails or crashes whilst it’s running, hence its name. It doesn’t necessarily mean that the code was corrupt in some way, but just that it did not work during its run-time. This kind of error will appear as an annoying notification on your screen unless handled and corrected. Here are symptoms, causes and ways to troubleshoot the problem.

Definitions (Beta)

Here we list some definitions for the words contained in your error, in an attempt to help you understand your problem. This is a work in progress, so sometimes we might define the word incorrectly, so feel free to skip this section!

  • Explorer – Windows Explorer is the file manager and navigation tool that exists in Microsoft Windows operating systems
  • Install – Installation or setup of a program including drivers, plugins, etc. is the act of putting the program onto a computer system so that it can be executed.
  • Msn – MSN originally The Microsoft Network; stylized as msn is an Internet service provider and Internet portal which provides basically a collection of Internet sites and services such as instant messaging services like MSN Messenger
Symptoms of Code 235 – MSN Explorer Error 235

Runtime errors happen without warning. The error message can come up the screen anytime MSN Explorer is run. In fact, the error message or some other dialogue box can come up again and again if not addressed early on.

There may be instances of files deletion or new files appearing. Though this symptom is largely due to virus infection, it can be attributed as a symptom for runtime error, as virus infection is one of the causes for runtime error. User may also experience a sudden drop in internet connection speed, yet again, this is not always the case.

Causes of MSN Explorer Error 235 – Error 235

During software design, programmers code anticipating the occurrence of errors. However, there are no perfect designs, as errors can be expected even with the best program design. Glitches can happen during runtime if a certain error is not experienced and addressed during design and testing.

Runtime errors are generally caused by incompatible programs running at the same time. It may also occur because of memory problem, a bad graphics driver or virus infection. Whatever the case may be, the problem must be resolved immediately to avoid further problems. Here are ways to remedy the error.

Repair Methods

Runtime errors may be annoying and persistent, but it is not totally hopeless, repairs are available. Here are ways to do it.

If a repair method works for you, please click the upvote button to the left of the answer, this will let other users know which repair method is currently working the best.

Please note: Neither nor it’s writers claim responsibility for the results of the actions taken from employing any of the repair methods listed on this page – you complete these steps at your own risk.

Method 1 – Close Conflicting Programs

When you get a runtime error, keep in mind that it is happening due to programs that are conflicting with each other. The first thing you can do to resolve the problem is to stop these conflicting programs.

  • Open Task Manager by clicking Ctrl-Alt-Del at the same time. This will let you see the list of programs currently running.
  • Go to the Processes tab and stop the programs one by one by highlighting each program and clicking the End Process buttom.
  • You will need to observe if the error message will reoccur each time you stop a process.
  • Once you get to identify which program is causing the error, you may go ahead with the next troubleshooting step, reinstalling the application.

Method 2 – Update / Reinstall Conflicting Programs

Using Control Panel

  • For Windows 7, click the Start Button, then click Control panel, then Uninstall a program
  • For Windows 8, click the Start Button, then scroll down and click More Settings, then click Control panel > Uninstall a program.
  • For Windows 10, just type Control Panel on the search box and click the result, then click Uninstall a program
  • Once inside Programs and Features, click the problem program and click Update or Uninstall.
  • If you chose to update, then you will just need to follow the prompt to complete the process, however if you chose to Uninstall, you will follow the prompt to uninstall and then re-download or use the application’s installation disk to reinstall the program.

Using Other Methods

  • For Windows 7, you may find the list of all installed programs when you click Start and scroll your mouse over the list that appear on the tab. You may see on that list utility for uninstalling the program. You may go ahead and uninstall using utilities available in this tab.
  • For Windows 10, you may click Start, then Settings, then choose Apps.
  • Scroll down to see the list of Apps and features installed in your computer.
  • Click the Program which is causing the runtime error, then you may choose to uninstall or click Advanced options to reset the application.

Method 3 – Update your Virus protection program or download and install the latest Windows Update

Virus infection causing runtime error on your computer must immediately be prevented, quarantined or deleted. Make sure you update your virus program and run a thorough scan of the computer or, run Windows update so you can get the latest virus definition and fix.

Method 4 – Re-install Runtime Libraries

You might be getting the error because of an update, like the MS Visual C++ package which might not be installed properly or completely. What you can do then is to uninstall the current package and install a fresh copy.

  • Uninstall the package by going to Programs and Features, find and highlight the Microsoft Visual C++ Redistributable Package.
  • Click Uninstall on top of the list, and when it is done, reboot your computer.
  • Download the latest redistributable package from Microsoft then install it.

Method 5 – Run Disk Cleanup

You might also be experiencing runtime error because of a very low free space on your computer.

  • You should consider backing up your files and freeing up space on your hard drive
  • You can also clear your cache and reboot your computer
  • You can also run Disk Cleanup, open your explorer window and right click your main directory (this is usually C: )
  • Click Properties and then click Disk Cleanup

Method 6 – Reinstall Your Graphics Driver

If the error is related to a bad graphics driver, then you may do the following:

  • Open your Device Manager, locate the graphics driver
  • Right click the video card driver then click uninstall, then restart your computer

Method 7 – IE related Runtime Error

If the error you are getting is related to the Internet Explorer, you may do the following:

  1. Reset your browser.
    • For Windows 7, you may click Start, go to Control Panel, then click Internet Options on the left side. Then you can click Advanced tab then click the Reset button.
    • For Windows 8 and 10, you may click search and type Internet Options, then go to Advanced tab and click Reset.
  2. Disable script debugging and error notifications.
    • On the same Internet Options window, you may go to Advanced tab and look for Disable script debugging
    • Put a check mark on the radio button
    • At the same time, uncheck the “Display a Notification about every Script Error” item and then click Apply and OK, then reboot your computer.

If these quick fixes do not work, you can always backup files and run repair reinstall on your computer. However, you can do that later when the solutions listed here did not do the job.